Hygrocontrol Type 83 hygrometer


The Hygrocontrol Type 83 Hygrometer was constructed for critical relative humidity and stainless steel are available in different lengths and diameters.  Analog current calibration over RS 232 3V. There are several different sensor filters available.

The instrument uses a capacitance type sensing element with polymer dielectric medium. The temperature sensor is a Pt-1000 Ohm RTD. Microprocessor control allows for multipoint calibration. A maximum accuracy of 1.5 %RH is achieved with 8 points. Built in special temperature compensation is to correct humidity values from deviations arising from temperature effects on the sensor and the electronics.


  • Moisture meters with the highest accuracy for mea­suring relative humidity and temperature in enclo­sures with protection class IP 65 with fixed probes.
  • Various probe tubes (from PP to stainless steel) are available, including pressure-proof for operation pressure + vacuum. 
  • Measured values are relative humidity and tempera­ture. 
  • Microprocessor-controlled measurement and cali­bration.
  • Linear measurements outputs for humidity.
  • Readings of humidity and temperature is also via CAN-BUS available (Type 84).
Hygrocontrol Type 83 Hygrometer 


  • Food and beverage
  • Chemical
  • Industrial manufacturing
  • Pharmaceutical
  • Petrochemical
  • Semiconductor
  • Museums
  • Printing
  • Pulp and printing
  • Industry dryers and humidifiers
  • Climate, environmental and test chambers
  • Heating, ventilation, and air-conditioning (HVAC)
  • Warehouses
  • Clean rooms

Request for Quote

COSA Xentaur
Process Insights
4140 World Houston Parkway
Suite 180
Houston, TX 77032

Process Insights BRANDS

Copyright © 2022 Process Insights, Inc. 
All Rights Reserved.